Paint Rack Generator

Rack footprint—

Bottles—

Rows—

Clear height between plates—

Fits build plate—

Project

Rack setup

Rack name

Plate sizing Edge margin (mm)

Fixed width (mm) Fixed depth (mm)

Gap within row (mm) Gap between rows (mm) Minimum row advance (mm)

Rows are packed using circle-to-circle clearance, so staggered row offsets pull rows closer automatically. The default 0 / 15 / 0 mm pattern reproduces the original rack exactly.

Front to back

Bottle rows and staircase heights

“Cross top” is measured upward from the top surface of the bottom plate. Set it to 0 for bottles that sit directly on the plate (the original design does this for the front row).

AdvancedPrint and geometry settings

Plate thickness (mm) Leg length (mm) Leg square size (mm)

Socket outer size (mm) Socket opening (mm) Socket height (mm)

Socket pocket depth (mm) Cross arm width (mm) Cross span / hole ratio

Circle resolution Build plate width (mm) Build plate depth (mm)

Ready to slice

Export

The top plate STL is exported in print orientation with the leg sockets pointing up — flip it over when assembling. Alignment with the bottom plate is preserved for any layout, including staggered and mixed-diameter racks.

Preparing preview…